by Carlyn Maw on January 7, 2014, no comments
TL;DR Monday was all about going full speed to make a track for the BrushBot Races happening on Wednesday at 12:30 PM to 3:30, 1421 Abbot Kinney Blvd. Intel will be donating money to MakerEd if the event is a success, so come on down and tweet about it. I have 25 kits, or bring […]
by Carlyn Maw on January 3, 2014, no comments
TL:DR I want to lead today’s post with a big giant thank you to GrandadIsAnOldMan and his Bargain Store Project #32 Styrofoam Cup and Plate Hovercraft. In addition to stripping down more objects from the stash, both the hovercraft (success!) and jet car (fail.) were attempted on Thursday. The hover craft was updated with construction paper […]
by Carlyn Maw on December 30, 2013, one comment
Saturday the 21st and Saturday the 28th were hopping with lots of folks joining in on the taking apart of many many objects. I tried to record as much as possible but it was such a wonderful feast of dismantlement it was tough to keep up! Oh, and there was face painting on the 21st. […]
by Carlyn Maw on December 20, 2013, one comment
TL;DR Bunnies! Hopping! Okay a little bit more. Thursday I continued the printer/scanner break down that Jen started, removing the metal assembly from it’s plastic case. One of the printer’s circuit boards yielded up more parts at heat gun point, primary target the connectors for the motors. I set up a “nail board” of sorts […]
by Carlyn Maw on December 18, 2013, no comments
TL;DR Barb came by to finish working on her wonderful Christmas tree. Since she was willing to stick around we worked together to harvest parts from some of the circuit boards we have lying around. – The day started with a little bit of organizing and going through some of the new e-waste. There were […]
by Carlyn Maw on December 17, 2013, no comments
TL;DR Couldn’t keep myself from opening a second VCR that arrived because it ALSO had a DVD player. The DVD part was definitely broken. Fully dismantling the DVD assembly let me track down the culprit: a cracked gear. Once the tray open/close function mostly worked again, I removed the player completely from it’s original home […]
by Carlyn Maw on December 16, 2013, one comment
TL;DR – Didn’t do more with floppy drives after all. Instead cracked open a brand spanking new (non-functional) VCR. Turns out what was wrong with it was melted belts. I replaced one with rolled up gaffer’s tape and it worked! I took a lot of video of that. So it is quite a bit harder […]
by Carlyn Maw on December 9, 2013, no comments
TL;DR: CEO of Intel genuinely committed to Makers and the electronics hobbyist. When it gets busy, I stop taking pictures. Next time (Thursday), stepper motors, computer fan motor, or mechanisms…? The CEO of Intel, Brian Krzanich, came by on Saturday, and, like an idiot, I didn’t get Jen and my picture taken with him to tweet. Not […]
by Carlyn Maw on December 6, 2013, no comments
TL;DR Thursday I caved and used parts from my personal stash to make a break-out board for the power supply. Sockets salvaged from the mother board and the floppy drive still serve as the inputs, though. I tried cutting out parts of a circuits board to appropriate but since I hadn’t realized our hacksaw had […]
by Carlyn Maw on December 4, 2013, no comments
TLDR: Monday I turned the motor I salvaged Saturday into a spinning flower. I added a dubious choice of cable to be the power cord for my motors-on-a-box project. I checked to make sure the ATX power supply worked and used it to drive the motors in a half disassembled DVD drive. Next time I hope […]