by Carlyn Maw on December 20, 2013, one comment
TL;DR Bunnies! Hopping! Okay a little bit more. Thursday I continued the printer/scanner break down that Jen started, removing the metal assembly from it’s plastic case. One of the printer’s circuit boards yielded up more parts at heat gun point, primary target the connectors for the motors. I set up a “nail board” of sorts […]
by Carlyn Maw on December 18, 2013, no comments
TL;DR Barb came by to finish working on her wonderful Christmas tree. Since she was willing to stick around we worked together to harvest parts from some of the circuit boards we have lying around. – The day started with a little bit of organizing and going through some of the new e-waste. There were […]
by Carlyn Maw on December 17, 2013, no comments
TL;DR Couldn’t keep myself from opening a second VCR that arrived because it ALSO had a DVD player. The DVD part was definitely broken. Fully dismantling the DVD assembly let me track down the culprit: a cracked gear. Once the tray open/close function mostly worked again, I removed the player completely from it’s original home […]
by Carlyn Maw on December 16, 2013, one comment
TL;DR – Didn’t do more with floppy drives after all. Instead cracked open a brand spanking new (non-functional) VCR. Turns out what was wrong with it was melted belts. I replaced one with rolled up gaffer’s tape and it worked! I took a lot of video of that. So it is quite a bit harder […]
by Carlyn Maw on December 9, 2013, no comments
TL;DR: CEO of Intel genuinely committed to Makers and the electronics hobbyist. When it gets busy, I stop taking pictures. Next time (Thursday), stepper motors, computer fan motor, or mechanisms…? The CEO of Intel, Brian Krzanich, came by on Saturday, and, like an idiot, I didn’t get Jen and my picture taken with him to tweet. Not […]
by Carlyn Maw on December 6, 2013, no comments
TL;DR Thursday I caved and used parts from my personal stash to make a break-out board for the power supply. Sockets salvaged from the mother board and the floppy drive still serve as the inputs, though. I tried cutting out parts of a circuits board to appropriate but since I hadn’t realized our hacksaw had […]
by Carlyn Maw on December 4, 2013, no comments
TLDR: Monday I turned the motor I salvaged Saturday into a spinning flower. I added a dubious choice of cable to be the power cord for my motors-on-a-box project. I checked to make sure the ATX power supply worked and used it to drive the motors in a half disassembled DVD drive. Next time I hope […]
by Carlyn Maw on December 1, 2013, no comments
TLDR: Saturday I rewired the DPDT circuits, soldered and broke lead wires, programmed an Arduino, wired up a transistor and desoldered a colorful array of resistors from a circuit board. (In pictures and short videos). Next time I plan to either mount more motors to the box or set up an H-Bridge. Also I’ll be […]
by Carlyn Maw on November 30, 2013, no comments
So this winter I am spending a couple of days a week taking things apart and making new objects from the pieces at the Intel Experience store. From those of you who follow me at the CRASH Space blog, you know how perfect this is. I heard about the gig through Maker Ed because they posted […]